IP Relay Board 8 Channels – Web, TCP/IP, Telnet, HTTP API, E-mails

This is Internet/Ethernet 8 channel SPDT relay module (board) for remote management and control with Virtual Serial Port, TCP/IP, Web, HTTP API, Telnet and serial commands access. It has 8 SPDT Relays, 8 digital inputs, 8 analog inputs and one UART port. Inputs can be adjusted to control relays (standalone work). Also inputs of one controller can control outputs of another over the LAN/WAN (box-to-box mode). It can send E-mails on inputs change as well. Suitable for remote control, home automation, data acquisition, sensor processing, alarm systems, PLC applications. Now with FREE Android and iOS App!

Category:

Description

This is Internet/Ethernet 8 channel SPDT relay module (board) for remote management and control with Virtual Serial Port, TCP/IP, Web, HTTP API, Telnet and serial commands access. It has 8 SPDT Relays, 8 digital inputs, 8 analog inputs and one UART port. Inputs can be adjusted to control relays (standalone work). Also inputs of one controller can control outputs of another over the LAN/WAN (box-to-box mode). It can send E-mails on inputs change as well. Suitable for remote control, home automation, data acquisition, sensor processing, alarm systems, PLC applications. Now with FREE Android and iOS App!

Specifications

  • 10/100 Mbit Ethernet interface with Link Led. Auto MDIX
  • UART interface for RS232/RS485 serial connection with other such controllers. UART can be used also for configuration of the parameters
  • Power supply voltage, selectable during purchase:
  • 12VDC
  • 24VDC
  • Power supply consumption (max): 400mA / 12VDC (about 240mA / 24VDC)
  • 8 SPDT relay channels (the type depends on the stocks quantity in our store):
  • TONGLING – JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
  • SUNHOLD – RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
  • 1 x 8 digital inputs. Levels: 0 – 3.3VDC
  • 1 x 8 analog inputs (0 – 2.048VDC input range). Referent voltage: 2.048 V, resolution: 10 bits (for series after 06 Nov 2017)
  • On boot the outputs are set with states before reset
  • Built in RTC (Real Time Clock). It can be synchronized via NTP manually or automatically each 6 hours
  • Capacitor power backup keeps time for days during power failure
  • Virtual Serial Port – it may be accessed with Serial RS232 commands over TCP/IP network
  • Integrated WEB server with password and features like Ajax parameters reading
  • Telnet commands
  • HTTP API commands
  • TCP/IP ASCII protocol with optional RC4 encryption
  • All the network ports can be defined by the user
  • Supports ICMP (ping)
  • 19 modes for I/O lines such as inverting, timer, pulses, setting output via input and switch ON/OFF according particular time (scheduling)
  • Any input may be referred to control any output of this or another controller in the TCP/IP network
  • Linearization for the analog inputs
  • Box-to-Box (distributed) mode
  • SMTP with authentication (SSL is not supported)
  • E-mail notifications for various events
  • IP address protection
  • Power and status led

After purchase you will receive

  • 1 x DAEnetIP3 – ET Ethernet controller – user manual DAEnetIP3_UM.pdf
  • 1 x 8 Output Channel Relay Board – link
  • 1 x Flat ribbon labeled cabel
  • 3 x plastic spacers

Application examples

  • Remote electrical devices control
  • Sensor information processing (temperature, humidity, distance…)
  • Management/monitoring for industrial
  • It may be used for simple standalone web based thermostat
  • Remote Lock/unlock doors
  • Home automation
  • Alram applications
  • Standalone PLC applications
  • Controlling another such device over the LAN/WAN without PC (Box-To-Box)

Power Supply

Please pay attention that:

  • The middle pin of the power jack is +12VDC
  • There is not protection against reverse voltage.
  • We recommend to use power supply adaptor that outputs 12 VDC stabilized.
  • Inproper power supply voltage will damage the device!