Web SNMP controlled 8 Relay Board v2

This is kit of IP controller and card with 8 SPDT relays. It is for home automation, hobby and commercial projects. It allows you controlling electrical devices via LAN/WAN (Internet). Just connect the device into your local network and control it from another computer or android smartphone over the LAN or Internet. This IP relay board can be controlled from: Configuration utility – DAEnetIP2 Manager, web browser, HTTP API commands, command line, android smartphone application. Now with FREE Android and iOS App! We provide also software examples for developers.

Category:

Description

This is kit of IP controller and card with 8 SPDT relays. It is for home automation, hobby and commercial projects. It allows you controlling electrical devices via LAN/WAN (Internet). Just connect the device into your local network and control it from another computer or android smartphone over the LAN or Internet. This IP relay board can be controlled from: Configuration utility – DAEnetIP2 Manager, web browser, HTTP API commands, command line, android smartphone application. Now with FREE Android and iOS App! We provide also software examples for developers.

Features

  • 10/100 Mb Ethernet interface with Link/Activity Led (for DAEnetIP2 rev2)
  • Power supply requirements – select-able during purchase (No protection against over-voltage and inverse polarity):
  • 300 mA / 12VDC
  • 200 mA / 24VDC
  • 8 SPDT relay channels (the type depends on the stocks quantity in our store):
  • TONGLING – JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
  • SUNHOLD – RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
  • 8 analog inputs with 10 bit resolution (0-3.3VDC)
  • 16 (2×8) bit configurable digital I/O port (0-3.3VDC) – in this kit one of the 2 ports is reserved for the relay board
  • Dimensions: Relay PCB – 85mm / 150mm / 20mm; DAEnetIP2 – 43mm / 55mm / 15mm
  • Standart protocols: ARP, IP, ICMP (ping), DHCP
  • Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (integrated web server with autorization) , TFTP (for firmware upgrade)
  • Ports for SNMP (161) and HTTP (80) can be changed
  • Two MAC addresses protection
  • It can be configured with SNMP requests or web browser
  • Integrated WEB server for all functions/parameters access. I/O lines labels can be changed via browser
  • HTTP API commands for getting/setting the I/O states (with basic access authentication)
  • Reset of the relays on incoming/outgoing ping timeout (watchdog function)
  • Function “load outputs(relays) states from EEPROM on boot”
  • Each I/O line can be named by user via web browser
  • It can send traps according analog ADC level
  • Analog Inputs may be referred to control the relay according their level
  • Possibility of connection analog sensors to the analog inputs as LM34DZ, LM35DZ, LM335, MCP9700A
  • Relay PCB parameters: FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask / Extra PCB openings for better voltage isolation / Doubled PCB tracks for better voltage isolation

Application examples

  • Security and fire alarm systems
  • Manual or automatic device restart if event occur
  • Management/monitoring for industrial
  • Sensor information processing
  • Remote Lock/unlock doors
  • Home automation